Turbochef-technologies Tornado Manuel d'utilisateur télécharger pdf (Page 24)

POWERING UP THE OVEN

Initial Power-Up

When power is initially applied, the “Initialization”

Screen will display the firmware version and the

oven’s serial number for five (5) seconds (Figure

11) before advancing to the

OFF screen. The OFF

screen displays “Oven Off” in large text (Figure 12).

Press the “Oven On” soft key — displayed on the

lower right of the

OVEN OFF

screen — to turn the

oven on and begin warmup.

NOTE: After one (1) hour in the OFF mode, the

display goes to minimum intensity to prevent

burn-in. Press any key to re-illuminate.

Power-Up

1. If the display is dim, press any key to re-illuminate.

The

OFF screen will be displayed (Figure 12).

NOTE: The OVEN OFF screen displays “Cooling

Down” if the cook cavity temperature is in excess

of 150ºF (65

C). Once the cook cavity has

cooled to below 150ºF (65

C), the

OFF screen

will no longer display “Cooling Down”.

NOTE: For U.S. models, the OFF screen displays

the operating voltage.

2. Press the “Oven On” soft key to turn the oven

on and begin warmup.

3. The

WARMING UP

screen will display “Warming

Up,” the cook cavity temperature (CC), and the

IR Temperature (IR) (Figure 13).

4. When the cook cavity temperature is within 7ºF

(5ºC) of the pre-defined set temperature, the

oven will display “Ready to Cook” and an alarm

will sound.

The Display will immediately advance to the

IDLE

screen, from which the user can select a food

group.

VOLTAGE SENSING

The oven is factory configured for 240 VAC.

Once plugged in, the oven will determine if the

incoming voltage differs from the current setting.

If the oven senses a 208 voltage supply, you will be

asked to change the voltage selection by selecting

the indicated voltage (Figure 14).

NOTE: The oven will not ask to be reconfigured

unless it detects the voltage supply has changed.

NOTE: Voltage sensing applies to U.S. oven

models only.

TRNADO_R 101906

NGCD-XXXXX

MENU LOADING...

OVEN OFF

AC VOLTS 240

OVEN

S/N NGCDXXXXX

CC 74

F IR 113

WARMING UP

PLEASE WAIT

FIGURE 11: Initialization Screen FIGURE 12: Off Screen FIGURE 13: Warming Up Screen

OPERATING THE TORNADO OVEN

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 47 48

Commentaires sur ces manuels

Pas de commentaire

Turbochef-technologies Tornado Manuel d'utilisateur Page 24

Commentaires sur ces manuels

Produits connexes et manuels pour Four Turbochef-technologies Tornado